Made from HSS M42 material with 8% Cobalt. Optimised for power with greater heat resistance and better protection against wear. Suitable for fine grained steel and stainless material.
Machined under the effect of plasma with a hard coating in the range of 2.5 μ, this core drills have considerably longer life and more uniform removal of chips, particularly with long drills.
Made from HSS M2 material, this core drills have long service life and high heat resistance by the use of high-performance steel. Drilling without excessive use of force.
Specially manufactured Tungsten Carbide Tip core drills for drilling Rail Tracks. The CarbideRAIL core drills can also be used to efficiently drill hard and corroded material .
Tungsten Carbide Tip core drills coated with hard, wear-resistant material under the effect of plasma in another work step. Preferable for machining stainless steel.
Tungsten Carbide Tip core drills for drilling hard material and drilling larger holes. Hard-tipped core drills have become a successful range of tools worldwide. Available upto 130 mm diameter.
All BDS Magnetic core drill machine run on single phase power supply and are still more powerful than any conventional drilling machine which run on 3 phase power supply.
The BDS Magnetic core drilling machine of professional range are equipped with integrated cooling tank which provides continuous lubrication while drilling. The tank is integrated in the body of the machine so designed that it looks as one unit.
BDS Magnetic Core Drilling Machines are safe to handle. Due to internal cabling, cables are protected against tearing-off.
The large switches for motor and magnetic power are separated and safe to handle, i.e., confusion is impossible and accidents are prevented. Thanks to the construction of the switch, unintended actuation of the motor switch is prevented.
The load configuration and the reserves of the electromagnet are exactly adapted for the performance of the respective magnetic core drilling machine. The user is informed by a visual control. LED green: The magnetic adhesion meets the minimum requirements. LED red: The magnetic adhesion is not sufficient, because it is reduced due to low material thickness or a coat of lacquer, forge scale or zinc.
The Swivel Base is an adjustment device on BDS magnetic core drilling machines. To use it: Bring the machine roughly into position, activate the magnet, disable the Swivel Base locking mechanism and now adjust the machine exactly. A relief, especially for overhead or hor- izontal work.
Cutting oil where it is required. This principle always ensures the exact amount and even distribution over the entire cutting area. No dry running and overheating of the drill, no excessive use of coolant. Tool service life and work results will be significantly improved.
BDS offers a wide range of highly efficient magnetic core drilling machines with powerful and durable motors. The spectrum ranges from 800 W to 2,300 W. They are designed for the high performance requirements of the magnetic core drill technology. BDS manufactures machines with multi-stage gearboxes, which are completely embedded in oil. BDS magnetic core drilling machines are robust and reliable.
The BDS ProfiPLUS class magnetic drilling machines are equipped with Speed & Torque control potentiometer to help you get the exact RPM and also the required torque while drilling, tapping, racing or countersinking.
The machines of the Profi-PLUS class are provided with a new visual wear control for the carbon brushes. By replacing the worn carbon brushes in time, you will protect the motor of your machine from damage.
The electronic control ensures continuous adaptation of the motor output to the load during drilling. The advantages are high performance at low speed and a steady sequence. If load peaks should be too high, the electronic torque control will be activated in order to prevent tool breakage and avoidable damage. An active contribution to employee safety with BDS machines.
The suitable core drill for you is
Headquartered in Monchengladbach, Germany, our simple and efficient strategy is optimized to continually produce the finest magnetic drilling machines, Core drills and Edge processing machines available. Over more than 40 countries rely on BDS to supply professional, robust, excellent quality machines capable of handling even the toughest metalworking jobs possible. The simplistic and superior design of these machines makes it possible for craftsmen to accomplish their work quickly and precisely.
BDS was founded in 1989, and has since become the leading manufacturer of magnetic drilling machines in across the world and number one in Germany. Driven by technology and determined to produce the highest-quality products in the industry, BDS leaves nothing to chance.
BDS focuses on designing and manufacturing more than 27 different magnetic drilling machine models for metalworking professionals around the globe. In fact, we offer the largest product range of any magnetic drilling machine manufacturer in the world. BDS is celebrating its 25 years Silver Jubilee of excellent quality and robust products. Simply Better Drilling.